 +86-13955557723     lzktony@lzkcnc.com                      Making quality and service a kind of belief is the trump card
How to maintain shearing machine?
You are here: Home » News » shearing machine » How to maintain shearing machine?

How to maintain shearing machine?

Views: 0     Author: Site Editor     Publish Time: 2022-08-03      Origin: Site


facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Shearing machines are to cut all kinds of metal plates. In the manufacturing system of plate flexibility, the shearing machine is often indispensable. Shearing machine belongs to the type of straight-line cutting, which is mainly used to cut the straight edge of various sizes of metal plates.

  • What are the failures of shearing machine?

  • How to troubleshoot the errors of shearing machine?

  • How to maintain shearing machine?

What are the failures of shearing machine?

The oil pump of shearing machine is too noisy. The oil suction resistance is large. Check the oil suction pipe and clear the blockage. If the oil volume of shearing machine is too low, replace the hydraulic oil with a higher oil volume. If the oil viscosity of shearing machine is too high, replace the working oil. If the clearance between the end face of the pump shaft and the motor shaft is small, adjust the clearance at the well end.

Oil temperature used in shearing machine is too high. There is excessive leakage inside the oil pump. The oil return pipe of the oil pump is blocked or not cleared. The oil viscosity is too high to repair the pipe. If the oil pump is damaged, replace it.

The air release valve of shearing machine leaks. Disassemble and check the tight seal of the conical surface of the relief valve.

The hole of shearing machine is congested. Clean, grind, debug, inspect, repair or replace the overflow valve.

How to troubleshoot the errors of shearing machine?

Shearing machine operator should master the operation of the shear hydraulic system. Whether the hydraulic system is working normally. Whether the hydraulic pump is abnormal. Check the cleanliness of the hydraulic oil used in shearing machine. Check the cleaning and replacement of the filter element. Whether the hydraulic components of shearing machine have been adjusted before failing. Whether the sealing component of shearing machine has been replaced. They also master the abnormal phenomena occurred in the hydraulic system of the shearing machine before and after the failure. They should be equipped with some knowledge about how to eliminate the failures causing shearing machine fail.

Check the actual working conditions of the shearing machine, together with system pressure, speed, oil, leakage, vibration and other parts.

Pay attention to the sound of shearing machine, such as attack noise, pump noise, and other abnormal noises. Judge whether the shearing machine is working normally.

Check the temperature of shearing machine to determine whether the working condition of the moving parts is normal.

How to maintain shearing machine?

Operate shearing machine strictly in accordance with the operating procedures. It is strictly forbidden to operate the shearing machine by non-designated personnel.

Add lubricating oil according to the requirements of the lubrication chart every time before starting the shearing machine. The oil should be clean and free of precipitation.

The shearing machine must be kept clean frequently. The unpainted part should be painted by anti-rust grease.

The lubricating oil in the motor bearing should be replaced and refilled regularly. The electrical part should be regularly checked for normal, safe and reliable operation.

Regularly check V-belts, handles, knobs, and buttons to avoid severely wearing. The spare parts should be reported for replenishment.

Regularly check and repair switches, insurances, and handles to ensure reliability.

Lubricate and scrub the shearing machine 10 minutes before leaving get off work every day.

Learn more about shearing machine can know the failures of shearing machine and the maintenance of shearing machine. LZK CNC Machine Tool(Anhui) Manufacturing Co., Ltd. is equipped with many professors in manufacturing and offering solutions.

LZK CNC Machine Tool(Anhui) Manufacturing Co.,Ltd.




    Add : Wangyun East Road, Silian Industrial Zone,Bowang District, Maanshan City, Anhui Province, China
General manager ( Tony Hu )
    Phone : +86-13955557723
    E-mail : lzktony@lzkcnc.com
Copyright  2021  LZK CNC Machine Tool(Anhui) Manufacturing Co.,Ltd.
Sitemap   |   Support By Leadong